Cation Chain Length of Nonhalogenated Ionic Liquids Matters in Enhancing SERS of Cytochrome c on Zr-Al-Co-O Nanotube Arrays.

Surface-enhanced Raman scattering (SERS) is a remarkably powerful analytical technique enabling trace-level detection of biological molecules. The interaction of a probe molecule with the SERS substrate shows important distinctions in the SERS spectra, providing inherent fingerprint information on the probe molecule. Herein, nonhalogenated phosphonium-based ionic liquids (ILs) containing cations with varying chain lengths were used as trace additives to amplify the interaction between the cytochrome c (Cyt c) and Zr-Al-Co-O (ZACO) nanotube arrays, strengthening the SERS signals. An increased enhancement factor (EF) by 2.5-41.2 times compared with the system without ILs was achieved. The improvement of the SERS sensitivity with the introduction of these ILs is strongly dependent on the cation chain length, in which the increasing magnitude of EF is more pronounced in the system with a longer alkyl chain length on the cation. Comparing the interaction forces measured by Cyt c-grafted atomic force microscopy (AFM) probes on ZACO substrates with those predicted by the extended Derjaguin-Landau-Verwey-Overbeek (XDLVO) theory, the van der Waals forces became increasingly dominant as the chain length of the cations increased, associated with stronger Cyt c-ZACO XDLVO interaction forces. The major contributing component, van der Waals force, stems from the longer cation chains of the IL, which act as a bridge to connect Cyt c and the ZACO substrate, promoting the anchoring of the Cyt c molecules onto the substrate, thereby benefiting SERS enhancement.

Genetic characterization of 2 Ceutorhynchus (Coleoptera: Curculionidae) weevils with mitogenomes and insights into the phylogeny and evolution of related weevils.

The rape stem weevil (Ceutorhynchus asper Roel.) and its close relatives primarily breed on cruciferous plants and cause severe damage to rapeseed production. However, their genetic and molecular information is still scarce. Here, we generated mitogenomes for both C. asper and Ceutorhynchus albosuturalis. The lengths of the 2 mitochondrial genomes are 14,207 bp (C. asper) and 15,373 bp (C. albosuturalis), and both weevils exhibit identical numbers of protein-coding genes with the absence of trnI. A + T contents for both mitogenomes are high (80% and 79.9%, respectively). Haplotype and genetic distance analyses showed that the genetic differentiation of C. asper populations in northwestern China is low. Based on 5 datasets from mitogenomes, phylogenetic analyses with maximum-likelihood and Bayesian methods show that both species (C. asper and C. albosuturalis) fall in the CCCMS clade (Curculioninae, Conoderinae, Cossoninae, Molytinae, and Scolytinae) of Curculionidae and belong to clades H and I of the genus Ceutorhynchus, respectively. Larvae of the clade H weevils mainly are borers in petioles or stems of cruciferous plants, while larvae of the clade I weevils mainly inhabit the fruits of the same plants, suggesting that ecological niche specialization can play a critical role in the diversification of Ceutorhynchus species. This study generates baseline molecular and genetic information for future research of Ceutorhynchus-related taxa and provides insights into the phylogeny and evolution of Curculionidae.

Integrative studies of ionic liquid interface layers: bridging experiments, theoretical models and simulations.

Ionic liquids (ILs) are a class of salts existing in the liquid state below 100 °C, possessing low volatility, high thermal stability as well as many highly attractive solvent and electrochemical capabilities, etc., making them highly tunable for a great variety of applications, such as lubricants, electrolytes, and soft functional materials. In many applications, ILs are first either physi- or chemisorbed on a solid surface to successively create more functional materials. The functions of ILs at solid surfaces can differ considerably from those of bulk ILs, mainly due to distinct interfacial layers with tunable structures resulting in new ionic liquid interface layer properties and enhanced performance. Due to an almost infinite number of possible combinations among the cations and anions to form ILs, the diversity of various solid surfaces, as well as different external conditions and stimuli, a detailed molecular-level understanding of their structure-property relationship is of utmost significance for a judicious design of IL-solid interfaces with appropriate properties for task-specific applications. Many experimental techniques, such as atomic force microscopy, surface force apparatus, and so on, have been used for studying the ion structuring of the IL interface layer. Molecular Dynamics simulations have been widely used to investigate the microscopic behavior of the IL interface layer. To interpret and clarify the IL structure and dynamics as well as to predict their properties, it is always beneficial to combine both experiments and simulations as close as possible. In another theoretical model development to bridge the structure and properties of the IL interface layer with performance, thermodynamic prediction & property modeling has been demonstrated as an effective tool to add the properties and function of the studied nanomaterials. Herein, we present recent findings from applying the multiscale triangle "experiment-simulation-thermodynamic modeling" in the studies of ion structuring of ILs in the vicinity of solid surfaces, as well as how it qualitatively and quantitatively correlates to the overall ILs properties, performance, and function. We introduce the most common techniques behind "experiment-simulation-thermodynamic modeling" and how they are applied for studying the IL interface layer structuring, and we highlight the possibilities of the IL interface layer structuring in applications such as lubrication and energy storage.

The impact of climate change and the conservation of the keystone Asian honeybee using niche models and systematic prioritization.

Global warming has seriously disturbed the Earth's ecosystems, and in this context, Asian honeybee (Apis cerana) has experienced a dramatic decline in recent decades. Here, we examined both direct and indirect effects of climate change on A. cerana through ecological niche modeling of A. cerana, and its disease pathogens (i.e., Chinese sacbrood virus and Melissococcus plutonius) and enemies (i.e., Galleria mellonella and Vespa mandarinia). Ecological niche modeling predicts that climate change will increase the potential suitability of A. cerana, but it will also cause some of the original habitat areas to become unsuitable. Outbreak risks of Chinese sacbrood disease and European Foulbrood will increase dramatically, while those of G. mellonella and V. mandarinia will decrease only slightly. Thus, climate change will produce an unfavorable situation for even maintaining some A. cerana populations in China in the future. Genetic structure analyses showed that the A. cerana population from Hainan Island had significant genetic differentiation from that of the mainland, and there was almost no gene flow between the 2, suggesting that urgent measures are needed to protect the unique genetic resources there. Through taking an integrated planning technique with the Marxan approach, we optimized conservation planning, and identified potential nature reserves (mainly in western Sichuan and southern Tibet) for conservation of A. cerana populations. Our results can provide insights into the potential impact of climate change on A. cerana, and will help to promote the conservation of the keystone honeybee in China and the long-term sustainability of its ecosystem services.

The Nanoscale Wetting Parameter and Its Role in Interfacial Phenomena: Phase Transitions in Nanopores.

Through analysis of the statistical mechanical equations for a thin adsorbed film (gas, liquid, or solid) on a solid substrate or confined within a pore, it is possible to express the equilibrium thermodynamic properties of the film as a function of just two dimensionless parameters: a nanoscale wetting parameter, αw, and pore width, H*. The wetting parameter, αw, is defined in terms of molecular parameters for the adsorbed film and substrate and so is applicable at the nanoscale and for films of any phase. The main assumptions in the treatment are that (a) the substrate structure is not significantly affected by the adsorbed layer and (b) the diameter of the adsorbate molecules is not very small compared to the spacing of atoms in the solid substrate. We show that different surface geometries of the substrate (e.g., slit, cylindrical, and spherical pores) and various models of wall heterogeneity can be accounted for through a well-defined correction to the wetting parameter; no new dimensionless variables are introduced. Experimental measurements are reported for contact angles for various liquids on several planar substrates and are shown to be closely correlated with the nanoscale wetting parameter. We apply this approach to phase separation in nanopores of various geometries. Molecular simulation results for the phase diagram in confinement, obtained by the flat histogram Monte Carlo method, are reported and are shown to be closely similar to experimental results for capillary condensation, melting, and the triple point. The value of the wetting parameter, αw, is shown to determine the qualitative behavior (e.g., increase vs decrease in the melting temperature, capillary condensation vs evaporation), whereas the pore width determines the magnitude of the confinement effect. The triple point temperature and pressure for the confined phase are always lower than those for the bulk phase for all cases studied.

Preparation of DES lignin-chitosan aerogel and its adsorption performance for dyes, catechin and epicatechin.

Herein, DES lignin was obtained by pretreatment of grapevine with a deep eutectic solvent (ChCl-LA). A novel chitosan-DES lignin composite aerogel material (CS-LIG aerogel) was prepared to adsorb methylene blue (MB), Congo red (CR), catechin (C), and epicatechin (EC). The CS-LIG aerogel was systematically characterized by modern technological instruments. It was demonstrated that the DES lignin was successfully incorporated and had an important effect on the morphological structure and adsorption of dyes and natural products in the aerogel. The adsorption kinetic models for both adsorbed CR and MB are pseudo-second-order models. Adsorption isotherms followed Langmuir for the adsorption of CR and Freundlich for the adsorption of MB. The π-π interaction and hydrogen bonding of DES lignin aromatic groups in CS-LIG aerogels were responsible for the adsorption of C and EC with 86.42 % and 90.85 % removal rates, respectively. This study opens a new avenue for the high-value utilization of DES lignin and the preparation of chitosan-based composites for the adsorption of dyes and purification of natural products.

Adjuvant TACE may not improve recurrence-free or overall survival in HCC patients with low risk of recurrence after hepatectomy.

Background: To identify whether adjuvant transarterial chemoembolization (TACE) can improve prognosis in HCC patients with a low risk of recurrence (tumor size ≤ 5 cm, single nodule, no satellites, and no microvascular or macrovascular invasions) after hepatectomy. Methods: The data of 489 HCC patients with a low risk of recurrence after hepatectomy from Shanghai Cancer Center (SHCC) and Eastern Hepatobiliary Surgery Hospital (EHBH) were retrospectively reviewed. Recurrence-free survival (RFS) and overall survival (OS) were analyzed with Kaplan-Meier curves and Cox proportional hazards regression models. The effects of selection bias and confounding factors were balanced using propensity score matching (PSM). Results: In the SHCC cohort, 40 patients (19.9%, 40/201) received adjuvant TACE, and in the EHBH cohort, 113 patients (46.2%, 133/288) received adjuvant TACE. Compared to the patients without adjuvant TACE after hepatectomy, patients receiving adjuvant TACE had significantly shorter RFS (P=0.022; P=0.014) in both cohorts before PSM. However, no significant difference existed in OS (P=0.568; P=0.082). Multivariate analysis revealed that serum alkaline phosphatase and adjuvant TACE were independent prognostic factors for recurrence in both cohorts. Furthermore, significant differences existed in tumor size between the adjuvant TACE and non-adjuvant TACE groups in the SHCC cohort. There were differences in transfusion, Barcelona Clinic Liver Cancer stage and tumor-node-metastasis stage in the EHBH cohort. These factors were balanced by PSM. After PSM, patients with adjuvant TACE after hepatectomy still had significantly shorter RFS than those without (P=0.035; P=0.035) in both cohorts, but there was no difference in OS (P=0.638; P=0.159). Adjuvant TACE was the only independent prognostic factor for recurrence in multivariate analysis, with hazard ratios of 1.95 and 1.57. Conclusions: Adjuvant TACE may not improve long-term survival and might promote postoperative recurrence in HCC patients with a low risk of recurrence after hepatectomy.

Effect of Electrode Surface Chemistry on Ion Structuring of Imidazolium Ionic Liquids.

Surface chemistry plays a critical role in the ion structuring of ionic liquids (ILs) at the interfaces of electrodes and controls the overall energy storage performance of the system. Herein, we functionalized the gold (Au) colloid probe of an atomic force microscope with -COOH and -NH2 groups to explore the effect of different surface chemical properties on the ion structuring of an IL. Aided by colloid-probe atomic force microscopy (AFM), the ion structuring of an imidazolium IL, 1-butyl-3-methylimidazolium hexafluorophosphate ([BMIM][PF6], abbreviated as BP hereafter), on the Au electrode surface and the ion response to the change in the surface chemistry are investigated. AFM morphologies, contact angles, and approaching force-distance curves of the BP IL on the functionalized Au surfaces exhibited that the IL forms a more obvious layering structure on the -COOH-terminated Au surface (Au-COOH), while it forms heterogeneous and aggregating droplets on the -NH2 surface (Au-NH2). The formed uniform and aggregation-free ion layers in the vicinity of the Au-COOH surface are due to the π-π+ stacking interaction between the delocalized π+ electrons from the imidazolium ring in the IL [BMIM]+ cation and the localized π electrons from the sp2 carbon on the -COOH group. The in situ observation of nano-friction and torsional resonance frequency at the IL-electrode interfaces further demonstrated the ion structuring of the IL at Au-COOH, which results in a more sensitive electrochemical response associated with a faster capacitive process.

Right-to-Left Displacement of an Airgun Lead Bullet after Transorbital Entry into the Skull Complicated by Posttraumatic Epilepsy : A Case Report.

Penetrating head injury is a serious open cranial injury. In civilians, it is often caused by non-missile, low velocity flying objects that penetrate the skull through a weak cranial structure, forming intracranial foreign bodies. The intracranial foreign body can be displaced due to its special quality, shape, and location. In this paper, we report a rare case of right-to-left displacement of an airgun lead bullet after transorbital entry into the skull complicated by posttraumatic epilepsy, as a reminder to colleagues that intracranial metal foreign bodies maybe displaced intraoperatively. In addition, we have found that the presence of intracranial metallic foreign bodies may be a factor for the posttraumatic epilepsy, and their timely removal appears to be beneficial for epilepsy control.

Ti-Si-Zr-Zn Nanometallic Glass Substrate with a Tunable Zinc Composition for Surface-Enhanced Raman Scattering of Cytochrome c.

As a remarkably powerful analytical technique, surface-enhanced Raman scattering (SERS) continues to find applications from molecular biology and chemistry to environmental and food sciences. In search of reliable and affordable SERS substrates, the development has moved from noble metals to other diverse types of structures, e.g., nano-engineered semiconductor materials, but the cost of the enhancement factors (EF) substantially decreasing. In this work, we employ biocompatible thin films of Ti-Si-Zr-Zn nanometallic glasses as the SERS substrates, while tuning the Zn composition. Aided by quartz crystal microbalance, we find that the composition of 4.3% Zn (Ti-Si-Zr-Zn4.3) gives an ultrasensitive detection of Cytochrome c (Cyt c) with an EF of 1.38 × 104, 10-fold higher than the previously reported EF in the semiconducting metal oxide nanomaterials, such as TiO2, and even comparable to the reported noble-metal-assisted semiconducting tungsten oxide hydrate. Ti-Si-Zr-Zn4.3 exhibits a stronger adhesion force toward Cyt c, which ensures the strong binding of Cyt c to the surface, facilitating the Cyt c adsorption onto the surface and thus enhancing the SERS signal. The high separation efficiency of photoinduced electrons and holes in Ti-Si-Zr-Zn4.3 is also acknowledged for promoting the SERS activity.

Programmable Interactions of Cellulose Acetate with Octadecyltrichlorosilane-Functionalized SiO2 Nanoparticles.

It is significant to understand the interfacial interactions involved between the cellulose acetate (CA) and dispersed nanomaterials, in which the enhanced interaction improves the mechanical behavior of CA. In this work, the amendments of CA with SiO2 nanoparticles have been found to be endowed by grafting varying concentrations (0, 3, 5, and 6%) of octadecyltrichlorosilane (OTS). Aided by SiO2 colloid probe atomic force microscopy (AFM with a probe diameter of 20 µm), the adhesion force between CA and SiO2 is found to be programmable by tuning OTS concentrations functionalized onto SiO2 surfaces. The adhesion forces of 5% OTS-functionalized SiO2 with CA are the strongest, followed by the ones of 0, 3, and 6% OTS, resulting in a smoother and denser morphology on the film with 5% OTS. The AFM-measured approaching force-distance curves have been further compared to predictions by the extended Derjaguin-Landau-Verwey-Overbeek (XDLVO) theory, in which the XDLVO force is summed as the Liftshitz-van der Waals force (FLW), the electrostatic double-layer force (FEL), and the acid-base interaction force (FAB). FLW and FEL do not change significantly with OTS concentrations functionalized onto SiO2. However, FAB is sensitive to the functionalized OTS concentration onto SiO2 and significantly contributes to the interaction force of the composite films with 5% OTS, promoting the formation of a smooth and dense surface feature with a considerable mechanical performance demonstrated by load-displacement curves from a nanoindenter. This is highly encouraging and suggests that nanomaterials can be incorporated into CA to effectively improve their mechanical compatibility by programming the interaction between the CA matrix and nanomaterials.

Value and prognostic factors of repeat hepatectomy for recurrent colorectal liver metastasis.

BACKGROUND: More than 50% of patients with colorectal cancer develop liver metastases. Hepatectomy is the preferred treatment for resectable liver metastases. This review provides a perspective on the utility and relevant prognostic factors of repeat hepatectomy in recurrent colorectal liver metastasis (CRLM). DATA SOURCES: The keywords "recurrent colorectal liver metastases", "recurrent hepatic metastases from colorectal cancer", "liver metastases of colorectal cancer", "repeat hepatectomy", "repeat hepatic resection", "second hepatic resection", and "prognostic factors" were used to retrieve articles published in the PubMed database up to August 2020. Additional articles were identified by a manual search of references from key articles. RESULTS: Despite improvements in surgical methods and perioperative chemotherapy, recurrence remains common in 37%-68% of patients. Standards or guidelines for the treatment of recurrent liver metastases are lacking. Repeat hepatectomy appears to be the best option for patients with resectable metastases. The commonly reported prognostic factors after repeat hepatectomy were R0 resection, carcinoembryonic antigen level, the presence of extrahepatic disease, a short disease-free interval between initial and repeat hepatectomy, the number (> 1) and size (≥ 5 cm) of hepatic lesions, requiring blood transfusion, and no adjuvant chemotherapy after initial hepatectomy. The median overall survival after repeat hepatectomy ranged from 19.3 to 62 months, and the 5-year overall survival ranged from 21% to 73%. Chemotherapy can act as a test for the biological behavior of tumors with the goal of avoiding unnecessary surgery, and a multimodal approach involving aggressive chemotherapy and repeat hepatectomy might be the treatment of choice for patients with early recurrent CRLM. CONCLUSIONS: Repeat hepatectomy is a relatively safe and effective treatment for resectable recurrent CRLM. The presence or absence of prognostic factors might facilitate patient selection to improve short- and long-term outcomes.

Magnetic resonance spectroscopy and liquid chromatography-mass spectrometry metabolomics study may differentiate pre-eclampsia from gestational hypertension.

OBJECTIVE: To investigate the findings of magnetic resonance imaging (MRI), magnetic resonance spectroscopy (MRS), and serum metabolomics for differentiating pre-eclampsia (PE) from gestational hypertension (GH). METHODS: This prospective study enrolled 176 subjects including a primary cohort with healthy non-pregnant women (HN, n = 35), healthy pregnant women (HP, n = 20), GH (n = 27), and PE (n = 39) and a validation cohort with HP (n = 22), GH (n = 22), and PE (n = 11). T1 signal intensity index (T1SI), apparent diffusion coefficient (ADC) value, and the metabolites on MRS were compared. The differentiating performances of single and combined MRI and MRS parameters for PE were evaluated. Serum liquid chromatography-mass spectrometry (LC-MS) metabolomics was investigated by sparse projection to latent structures discriminant analysis. RESULTS: Increased T1SI, lactate/creatine (Lac/Cr), and glutamine and glutamate (Glx)/Cr and decreased ADC value and myo-inositol (mI)/Cr in basal ganglia were found in PE patients. T1SI, ADC, Lac/Cr, Glx/Cr, and mI/Cr yielded an area under the curves (AUC) of 0.90, 0.80, 0.94, 0.96, and 0.94 in the primary cohort, and of 0.87, 0.81, 0.91, 0.84, and 0.83 in the validation cohort, respectively. A combination of Lac/Cr, Glx/Cr, and mI/Cr yielded the highest AUC of 0.98 in the primary cohort and 0.97 in the validation cohort. Serum metabolomics analysis showed 12 differential metabolites, which are involved in pyruvate metabolism, alanine metabolism, glycolysis, gluconeogenesis, and glutamate metabolism. CONCLUSIONS: MRS is expected to be a noninvasive and effective tool for monitoring GH patients to avoid the development of PE. KEY POINTS: • Increased T1SI and decreased ADC value in the basal ganglia were found in PE patients than in GH patients. • Increased Lac/Cr and Glx/Cr, and decreased mI/Cr in the basal ganglia were found in PE patients than in GH patients. • LC-MS metabolomics showed that the major differential metabolic pathways between PE and GH were pyruvate metabolism, alanine metabolism, glycolysis, gluconeogenesis, and glutamate metabolism.

Association studies of genes in a Pb response-associated network in maize (Zea mays L.) reveal that ZmPIP2;5 is involved in Pb tolerance.

Lead (Pb) in the soil affects the growth and development of plants and causes damages to the human body through the food chain. Here, we identified and cloned a Pb-tolerance gene ZmPIP2;5 based on a weighted gene co-expression network analysis and gene-based association studies. We showed that ZmPIP2;5 encodes a plasma membrane aquaporin and positively regulated Pb tolerance and accumulation in Arabidopsis and yeast. Overexpression of ZmPIP2;5 increased root length and fresh weight of Arabidopsis seedlings under Pb stress. Heterologous expression of ZmPIP2;5 in yeast caused the enhanced growth speed under Pb treatment and Pb accumulation in yeast cells. A (T/A) SNP in the ZmPIP2;5 promoter affected the expression abundance of ZmPIP2;5 and thereby led to the difference in Pb tolerance among different maize lines. Our study helps to understand the mechanism underlying plant tolerance to Pb stress and provides new ideas for breeding Pb-tolerance maize varieties via molecular marker-assisted selection.

A Practical Risk Classification of Early Recurrence in Hepatocellular Carcinoma Patients with Microvascular invasion after Hepatectomy: A Decision Tree Analysis.

PURPOSE: This study was designed to establish risk classifications for early recurrence in hepatocellular carcinoma (HCC) patients with microvascular invasion (MVI) after hepatectomy. METHODS: The data of 563 HCC patients with MVI after hepatectomy from two hospitals were retrospectively reviewed. Kaplan-Meier curves and Cox proportional hazards regression models were used to analyse early recurrence. The risk classification for early recurrence was established by using classification and regression tree (CART) analysis and validated by using two independent validation cohorts from two hospitals. RESULTS: Multivariate analysis revealed that four indices, namely, infection of chronic viral hepatitis, MVI classification, tumour size, and serum alpha-fetoprotein (AFP), were independent prognostic factors for early recurrence in HCC patients with MVI. By CART analysis, MVI classification and serum AFP became the nodes of a decision tree and 3-stratification classifications that satisfactorily determined the risk of early recurrence were established. The area under the time-dependent receiver operating characteristic curve (AUC) values of the classification for early recurrence at 0.5, 1.0, and 2.0 years were 0.75, 0.73, and 0.71, respectively, which were all significantly higher than three common classic HCC stages (BCLC stage, Chinese stage, and TNM stage). The calibration curves showed good agreement between predictions by classification for early recurrence and actual survival outcomes. These prediction results also were confirmed in the independent internal and external validation cohorts. CONCLUSIONS: The 3 stratification classifications enabled satisfactory risk evaluation of early recurrence in HCC patients with MVI after hepatectomy.

Right-to-Left Displacement of an Airgun Lead Bullet after Transorbital Entry into the Skull Complicated by Posttraumatic Epilepsy : A Case Report

Penetrating head injury is a serious open cranial injury. In civilians, it is often caused by non-missile, low velocity flying objects that penetrate the skull through a weak cranial structure, forming intracranial foreign bodies. The intracranial foreign body can be displaced due to its special quality, shape, and location. In this paper, we report a rare case of right-to-left displacement of an airgun lead bullet after transorbital entry into the skull complicated by posttraumatic epilepsy, as a reminder to colleagues that intracranial metal foreign bodies maybe displaced intraoperatively. In addition, we have found that the presence of intracranial metallic foreign bodies may be a factor for the posttraumatic epilepsy, and their timely removal appears to be beneficial for epilepsy control.

Immobilizing Ionic Liquids onto Functionalized Surfaces for Sensing Volatile Organic Compounds.

Herein, a highly sensitive volatile organic compound (VOC) gas sensor is demonstrated using immobilized ionic liquid (IL), 1-butyl-3-methylimidazolium hexafluorophosphate, onto surfaces functionalized by the quaternary ammonium group -N+R, -COOH, and -NH2, i.e., N+-IL, COOH-IL, and NH2-IL, respectively. These functional groups ensure highly tunable interactions between the IL and surfaces, efficiently modulating the electrical resistance of the immobilized IL upon exposure to acetone and toluene. The immobilized IL to both acetone and toluene displays significant electronic resistance changes at a concentration of 150 ppm, falling in the order NH2-IL > N+-IL > COOH-IL for acetone while COOH-IL > NH2-IL > N+-IL for toluene. A better gaseous sensing ability is achieved in COOH-IL for toluene than acetone, while this does not hold in the case of NH2-IL and N+-IL surfaces because of the completely different ion structuring of the IL at these functionalized surfaces. The accelerated ion mobility in the IL that is immobilized onto functionalized surfaces is also responsible for the strong gaseous sensing response, which is demonstrated further by the atomic force microscopy-measured smaller friction coefficient. This is highly encouraging and suggests that ILs can be immobilized by a network formed by surface functionalization to easily and cheaply detect VOCs at ppm concentrations.

Microstructural probing of phosphonium-based ionic liquids on a gold electrode using colloid probe AFM.

Atomic force microscopy (AFM) with a gold colloid probe modeled as the electrode surface is employed to directly capture the contact resonance frequency of two phosphonium-based ionic liquids (ILs) containing a common anion [BScB]- and differently lengthened cations ([P6,6,6,14]+ and [P4,4,4,8]+). The comparative interfacial studies are performed by creating IL films on the surface of gold, followed by measuring the wettability, thickness of the films, adhesion forces, surface morphology and AFM-probed contact resonance frequency. In addition, the cyclic voltammetry and impedance spectroscopy measurements of the neat ILs are measured on the surface of the gold electrode. The IL with longer cation alkyl chains exhibits a well-defined thin film on the electrode surface and enhanced the capacitance than the shorter chain IL. The AFM contact resonance frequency and force curves reveal that the longer IL prefers to form stiffer ion layers at the gold electrode surface, suggesting the "…anion-anion-cation-cation…" bilayer structure, in contrast, the shorter-chain IL forms the softer cation-anion alternating structure, i.e., "…anion-cation-anion-cation…".

Prediction of pre-eclampsia by using radiomics nomogram from gestational hypertension patients.

Background: Pre-eclampsia (PE) is the main cause of death in maternal and prenatal morbidity. No effective clinical tools could be used for the prediction of PE. A radiomics nomogram based on diffusion-weighted imaging (DWI) and apparent diffusion coefficient (ADC) maps was established to predict PE from gestational hypertension (GH). Materials and methods: A total of 138 patients with hypertensive disorders of pregnancy were continuously enrolled in the study prospectively, namely, 58 patients with PE and 80 patients with GH. The patients were randomly divided into a training cohort (n = 97) and a test cohort (n = 41). Radiomics features were extracted from DWI and ADC maps. The radiomics signature was constructed using a least absolute shrinkage and selection operator (LASSO) algorithm in the training cohort. A radiomics nomogram was developed by combining the radiomics signature with the selected clinical risk factors. The area under the receiver operating characteristic (ROC) curves (AUC), specificity, sensitivity, accuracy, positive predictive value, and negative predictive values of the radiomics signature, clinical risk factors, and radiomics nomogram were calculated. Decision curve analysis (DCA) was performed to determine the clinical usefulness of the radiomics nomogram. Results: The LASSO analysis finally included 11 radiomics features, which were defined as the radiomics signature. The individualized prediction nomogram was constructed by integrating the radiomics signature, maternal age, and body mass index (BMI). The nomogram exhibited a good performance both in the training cohort [AUC of 0.89 (95% CI, 0.82-0.95)] and test cohort [AUC of 0.85 (95% CI, 0.73-0.97)] for predicting PE from GH. The DCA indicated that clinicians and patients could benefit from the use of radiomics nomogram. Conclusion: The radiomics nomogram could individually predict PE from GH. The nomogram could be conveniently used to facilitate the treatment decision for clinicians and patients.